User manual
REMOTE INTERFACE
109
SOURce[1]:RAMP:SYMMetry
Set
Query
Description
Sets or queries the symmetry for ramp waves only.
The setting is remembered if the function mode is
changed. The default symmetry is 100%.
0% symmetry is a ramp waveform with a negative
going transition. 100% symmetry is a ramp
waveform with a positive going transition.
0% 50% 100%
Note
For ramp waveforms, the Apply command and
AM/FM modulation modes ignore the current
symmetry settings.
Syntax
SOURce[1]:RAMP:SYMMetry {< percent>
|MINimum|MAXimum}
Example
SOUR[1]:RAMP:SYMM MAX
Sets the symmetry to the 100%.
Query Syntax
SOURce[1]:RAMP:SYMMetry?
{MINimum|MAXimum}
Return Parameter
<NR3>
Returns the symmetry as a percentage.
Query Example
SOUR1:RAMP:SYMMetry?
>+1.0000E+02
The symmetry is set as 100%.
OUTPut
Set
Query
Description
Enables/Disables or queries the front panel
output. The default is set to off.
Syntax
OUTPut {OFF|ON}
Example
OUTP ON
Turns the output on.