User manual

OPERATION
61
FSK Carrier Frequency
The maximum carrier frequency depends on the carrier shape. The
default carrier frequency for all carrier shapes is 1kHz. The voltage
level of the Trigger input port controls the output frequency when
EXT is selected as the source. When the Trigger input signal is
logically low, the carrier frequency is output and when the signal is
logically high, the hop frequency is output.
Panel Operation
1. Press FREQ key.
FREQ
2. The FREQ icon will flash in the frequency
display area.
3. Use the arrow
keys, scroll wheel
and Enter key to
edit the frequency.
→
Enter
Use the keypad
and the relevant
unit key to enter a
new frequency.
0
/
321
4
7 8
5
9
6
→
Hz/Vpp
kHz/Vrms
MHz/dBm
Range
Sine
0.1Hz ~ 25MHz*
Square
0.1Hz ~ 25MHz*
Ramp
0.1Hz ~ 1MHz
*limited to 5MHz for the AFG-2105, 12MHz for
the AFG-2112.