User manual

OPERATION
71
Sweep Rate
The sweep rate is used to determine how long it takes to perform a
sweep from the start to stop frequencies. The function generator
automatically determines the number of discrete frequencies used in
the scan depending on the length of the scan.
Panel Operation
1. Press the Shift + Rate key.
Shift
+
Rate
FSK
2. The Rate icon will flash in the frequency
display area.
3. Use the arrow
keys, scroll wheel
and Enter key to
edit the rate.
→
Enter
Use the keypad
and the relevant
unit key to enter a
new rate.
0
/
321
4
7 8
5
9
6
→
Hz/Vpp
kHz/Vrms
Range
Sweep Rate
1kHz ~ 2mHz (1ms ~ 500s)
Default
100Hz
Example:
Rate= 100Hz