User manual

AFG-2000 Series User Manual
82
Save and Recall State/ARB Waveform
The AFG-2000 has non-volatile memory to store instrument state
and ARB data. There are 10 memory location numbered 0~19.
Memory locations 0~9 saves/recalls the instrument state, memory
locations 10~19 saves/recalls ARB data.
The instrument saves the following states: the selected function
(including ARB), frequency, amplitude, DC offset, duty
cycle/symmetry, and any of the modulation parameters.
Panel Operation
1. Press the Shift +
Save/Recall key to either
select Save (to save the
state) or Recall (to recall
the state).
Shift
+
Save/Recall
Hz/Vpp
→ Save
2. Save or Recall will be shown in the secondary
display area.
3. Use the scroll
wheel or keypad to
choose the
save/recall
number.
or
0
/
321
4
7 8
5
9
6
Use the Enter key
to save/recall the
state.
Enter