User manual

AFG-2000 Series User Manual
90
SOURce1:FREQuency? MINimum
SOURce1:FREQuency?
Braces { }
Commands that contain braces indicate one item
within the braces must be chosen. Braces are not
sent with the command.
Angled Brackets
< >
Angle brackets are used to indicate that a value
must be specified for the parameter. See the
parameter description below for details. Angled
brackets are not sent with the command.
Bars |
Bars are used to separate multiple parameter
choices in the command format.
Parameters
Type
Description
Example
<Boolean>
Boolean logic
0, 1/ON,OFF
<NR1>
integers
0, 1, 2, 3
<NR2>
decimal numbers
0.1, 3.14, 8.5
<NR3>
floating point
4.5e-1, 8.25e+1
<NRf>
any of NR1, 2, 3
1, 1.5, 4.5e-1
<NRf+>
<Numeric>
NRf type with a
suffix including
MINimum,
MAXimum or
DEFault
parameters.
1, 1.5, 4.5e-1
MAX, MIN,
DEF
<aard>
Arbitrary ASCII
characters.
<discrete>
Discrete ASCII
character
parameters
IMM, EXT,
MAN
<frequency>
<peak deviation
in Hz>
<rate in Hz>
NRf+ type
including
frequency unit
suffixes.
1 KHZ, 1.0 HZ,
ΜHZ