Owner's Manual

INFORMATION (HOME) SCREEN
If there is no communication between the AGA Total
Control and the handset because: the cooker is not
powered, in standby or the handset is out of range from
the cooker. The symbol is displayed.
This is the main screen, where information such as time, date, battery life and connectivity is displayed. If you have programmed either of the
‘AUTO’ modes and they are currently in progress, the next change of event will also be displayed. The information below explains this in more
detail.
Press any button on the handset to open this screen, from ‘Sleep’ mode.
Symbol indicating the battery life.
Symbols indicating the current time and day.
Change of Event Symbols
AUTO event on
(before AUTO event)
AUTO event OFF
(during AUTO event)
AUTO/Slumber event ON
(before AUTO/Slumber event)
AUTO/Slumber event OFF
(during AUTO/Slumber event)
Communication/Handshake symbol indicates
communication between the cooker and handset
is OK.
Warning triangle and error code is displayed if
an error occurs.
If either AUTO or AUTO/Slumber mode is active the
next event change will be displayed for that day with
the relevant symbols to show start and end times.
N
OTE: If standby icon is shown then event indicator
will not be displayed.
14