Product Manual

2322
EN
Electromagnetic Compatibility (EMC)
Description
The term Electromagnetic Compatability is taken to mean the capability
of theproduct to function smoothly in an environment where electro-
magnetic radiation and electrostatic discharges are present, and without
causing electromagnetic disturbances to other equip- ment.
WARNING
Electromagnetic radiation can cause disturbances in other equipment.
Although the product meets the strict regulations and standards
which are in force in this respect, Agatec cannot completely exclude
the possibility that other equipment may be disturbed.
CAUTION
There is a risk that disturbances may be caused in other equipment
if the product is used in conjunction with accessories from other manu-
facturers, for example field computers, personal computers, two-way
radios, non- standard cables or external batteries.
Precautions:
Use only the equipment and accessories recommended by Agatec.
When combined with the product, they meet the strict requirements
stipulated by the guide- lines and standards. When using computers
and two- way radios, pay attention to the information about electromagnetic
compatibility provided by the manufacturer.
CAUTION
Disturbances caused by electromagnetic radia- tion can result in erroneous
measurements.
Although the product meets the strict regulations and standards whichin
this respect, Agatec cannot completely exclude the possibility product
may be disturbed by very intense electromagnetic radiation, near radio
transmitters, two-way radios or diesel gener- ators.
Precautions:
Check the plausibility of results obtained under these conditions.
FCC Statement, Applicable in U.S.
WARNING
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate frequency energy and, if
not installed and used in accordance with the instructions, may cause
harmful interference to radio communication.
However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encour- aged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV techni-cian for help.
WARNING
Changes or modifications not expressly approved by Agatec for compliance
could void the user's authority to operate the equipment.
This product is subject to the terms and conditions set out in the
International Limited Warranty which you can download from the Agatec
home page at www.agatec.com or collect from your Agatec distributor.
The foregoing warranty is exclusive and is in lieu of all other warranties,
terms or conditions, express or implied, either in fact or by operation of
law, statutory or otherwise, including warranties, terms or conditions of
merchantability, fitness for a particular purpose, satisfactory quality and
non-infringement, all of which are expressly disclaimed.
REMOTE CONTROL
IR Remote range up to 30 m (100 ft)
Batteries one AA alkaline battery
REMOTE RECEIVER CONTROL
Batteries a 9-volt type alkaline battery
RECEIVER
Batteries a 9-volt type alkaline battery
International Limited Warranty
AGATEC SAS
21, boulevard Littré - F- 78600 Le Mesnil le Roi
Phone [phone] - www.agatec.com