User Manual

58
2921B EN 20031206
Preventive maintenance schedule
The Drystar 5300 is designed for trouble-free service. Maintenance and
cleaning involve only some minor user tasks.
Safety guidelines
•
Do not lubricate the printer.
• Do not attempt to disassemble the printer.
• Do not touch the resistor line of the print head.
• Always switch off the Drystar 5300 and disconnect the power cord from the
outlet before carrying out any maintenance work inside the printer.
" Film jam removal or cleaning the printer head can be done without
switching the power off. Nevertheless, care should be taken and the
‘Safety precautions’ on page 8 should be respected.
Interval What to do? Page
Ad hoc ‘Cleaning the exterior’ 59
Ad hoc
‘Cleaning the print head resistor
line’
60
To prevent damage to the printer while performing maintenance, observe
the following safety precautions: