user manual

Chapter 9 125

Service

Automated Performance Tests

The performance verification tests make up the VBA performance test software

program. Your network analyzer is required to execute an VBA program to verify

test set performance.

The performance verification tests are designed to verify specifications for the test

set as listed in Table 8-2.

The performance test software uses traditional analyzer calibrations rather than a

Test Set Cal. This is because the multiport test set is treated as a DUT by the

analyzer.

The program file name is “87075C_PT_with E506162A.vba”. To perform the

performance test for the 87075C, execute the program in accordance with the

following procedure.

Step 1. Connect a mouse and an external keyboard to the E5061A/E5062A’s rear panel

connectors, then turn the E5061A/E5062A on.

Step 2. Insert the program disk.

Step 3. Press [Macro Setup] key.

Step 4. Press

Load Project to select Load Project function. "Open" dialog box as shown

below appears.

Open dialog box

Step 5. Select "User [A]" from menu in the "Look in:" box.

Step 6. Click "87075C_PT_with E506162A.VBA" program file.