user manual

60 Chapter 5
Key Reference
Cal Menu
[Cal]
(Continued)
Test Set Cal
Calibration
Port 1-2
ECal Executes 2-port ECal for ports 1 and 2 of the multi-port
test set.
:SENS{1-4}:CORR:MULT:C
OLL:ECAL 2,1
Return Returns to the softkey display in one level upper.
Port 3-4 Displays the softkeys to calibrate ports 3 and 4 of the multi-port test set. The lower
level softkeys displayed are the same as those for Port 1-2
.
:
Port 11-12 Displays the softkeys to calibrate ports 11 and 12 of the multi-port test set. The lower
level softkeys displayed are the same as those for Port 1-2.
Cal Type Selects a calibration method for calibrating each port of
the multi-port test set.
:SENS{1-4}:CORR:MULT:C
OLL:METH
Cal Kit
Displays the softkeys to select a calibration kit to calibrate the multi-port test set. The
softkey labels for the calibration kit differ depending on the registered data.
85033E Selects the 85033E calibration kit.
:SENS{1-4}:CORR:COLL:C
KIT 1
: :
:
User Selects a calibration kit newly registered.
:SENS{1-4}:CORR:COLL:C
KIT 10
Cancel Returns to the softkey display in one level upper.
Done Finishes the calibration and calculates the calibration
coefficients.
:SENS{1-4}:CORR:MULT:C
OLL:SAVE
Return Returns to the softkey display in one level upper.
Self Cal Toggles on/off the auto calibration feature using the
internal standard of the multi-port test set.
:SENS{1-4}:CORR:MULT:SE
LF