user manual

Chapter 6 69
SCPI Command Reference
:SENS{1-4}:CORR:MULT
Multiport Testset Commands
This section describes the commands of 87075C Multiport Testset.
:SENS{1-4}:CORR:MULT
Syntax :SENSe{[1]|2|3|4}:CORRection:MULTiport[:STATe] {ON|OFF|1|0}
:SENSe{[1]|2|3|4}:CORRection:MULTiport[:STATe]?
Description For channel 1 to channel 4, enables/disables the calibration of the test set.
Parameters
Query response {1|0}<newline><^END>
Example of use
10 OUTPUT 717;":SENS1:CORR:MULT ON"
20 OUTPUT 717;":SENS1:CORR:MULT?"
30 ENTER 717;A$
Related commands
Equivalent key
[Cal] - Test Set Cal - Test Set Cal
Description
ON or 1 Enables the calibration of the test set.
OFF or 0 (preset value) Disables the calibration of the test set.