user manual

72 Chapter 6

SCPI Command Reference

:SENS{1-4}:CORR:MULT:COLL:LOAD

Syntax :SENSe{[1]|2|3|4}:CORRection:MULTiport:COLLect[:ACQuire]:LOAD <value>

Description For channel 1 to channel 4, measures the calibration data of the load standard of the

specified port.

NOTE If :SENS{1-4}:MULT on page 81 is off, an error occur.

Parameters

Query response No query

Example of use

10 OUTPUT 717;":SENS1:CORR:MULT:COLL:LOAD 1"

Related commands :SENS{1-4}:MULT on page 81

:SENS{1-4}:CORR:MULT:COLL:OPEN on page 74

:SENS{1-4}:CORR:MULT:COLL:SHOR on page 76

:SENS{1-4}:CORR:MULT:COLL:THRU on page 77

:SENS{1-4}:CORR:MULT:COLL:ISOL on page 71

Equivalent key

[Cal] - Test Set Cal - Calibration - Port x-y - Port x Load (or Port y Load)

Description

value Specifies a port of the test set for which the calibration data

of the load standard is measured.