user manual

82 Chapter 6
SCPI Command Reference
:SENS{1-4}:MULT:PORT{1-2}:SEL
:SENS{1-4}:MULT:PORT{1-2}:SEL
Syntax :SENSe{[1]|2|3|4}:MULTiport:PORT{[1]|2}:SELect <value>
:SENSe{[1]|2|3|4}:MULTiport:PORT{[1]|2}:SELect?
Description For channel 1 to channel 4, specifies ports to which the reflection port (port 1) of the
test set and the transmission port (port 2) are connected. The same port cannot be
specified as a port to which port 1 and port 2 are connected.
Parameters
Query response <value><newline><^END>
Example of use
10 OUTPUT 717;":SENS1:MULT:PORT1:SEL 3"
20 OUTPUT 717;":SENS1:MULT:PORT1:SEL?"
30 ENTER 717;A
Related commands :SENS{1-4}:MULT on page 81
:SENS{1-4}:MULT:PROP on page 83
Equivalent key
[System] - 87075 Setup - Reflection - Port x (x= from 1 to 12)
[System] - 87075 Setup - Transmission - Port y (y= from 1 to 12)
<value>
Description Port numbers to which port 1 and port 2 of the test set are
connected.
Range 1 to 12
Preset value Reflection port: 1 Transmission port: 2