Agri-Fab ® OWNERS MANUAL Model No. 45-0350 (ATV) 45-0351 (FARM) (45-0350 TANDEM CAUTION Read Rules for Safe Operation and Instructions Carefully • • • • • SHOWN) AXLE CART Safety Assembly Operation Maintenance Parts SpeedEPart the _as_es_ wa_ topurchase pa_t_ www.speedepart.com PRINTED IN USA FORM NO. 48902 (REV.
SAFETY RULES Remember, any power equipment can cause injury if operated improperly or if the user does not understand to operate the equipment. Exercise caution at all times when using power equipment. CAUTION: IMPORTANT SAFETY PRECAUTIONS. IT MEANS-BECOME ALERT! LOOK FORATTENTION! THIS SYMBOL TO POINT OUT YOUR SAFETY IS INVOLVED. ,_ VEHICLE BRAKING how AND THE ADDITION OF AN ACCESSORY STABILITY MAY BE AFFECTED WITH OR AN ATTACHMENT. BE AWARE OF CHANGING CONDITIONS ON SLOPES. 1. 2. 3. 4. 5. 6. 7.
SHOWN FULL SIZE J B P jS jU T \J _J O Q NOT SHOWN FULL SIZE _X V HARDWARE Ref. PACK Description 45-0350 2 2O R 1" Thin Washer, (8 pcs. extra) 1" Thick Washer 2O 25 S Spring 1 1 25 14 T Cotter Pin, 1/8" x 1-1/2" Lg. Hair Cotter Pin 1/8" 6 6 14 1 1 8 1 4 W Spacer Hitch Pin 4 1 1 1 X Vinyl Edging 2 1 Y Vinyl Cap 2 2 Z Spring Puller Tool 1 1 Hub Cap 6 6 Hex Bolt, 3/8" x 1" I 1 N -- O 1 P Truss Hd.
ASSEMBLY TOOLS (1) (1) (2) (2) (2) (1) 1. 2. INSTRUCTIONS REQUIRED 5. FOR ASSEMBLY Screwdriver Pliers 7/1 6" Wrenches 1/2" Wrench 9/1 6" Wrenches Grease Gun with general 6. purpose grease 7. Remove the hardware pack and all loose parts from the carton. Be sure the carton is empty before discarding. Lay out all parts as shown. Extra pieces of some items may be included in hardware pack. 8. CAUTION Position the tailgate reinforcement bracket on outside of cart as shown in figure 3.
10. Assemblethe front paneloverthe end of the cart usingsix 1/4"x 1/2"hexboltsand1/4"SEMSnuts as shown in figure 4. Leave two holes in the bottomof the panelemptyas shown.Pullthe cart bodyhalvestogetherandtighten the boltsin the bottomofthe frontpanel,thentighten the boltsin the sides. Seefigure 4. 11. Tighten the bolts assembledin step 4 to fasten the bottomof the carttogether. LEAVE HOLES OPEN FOR LATCH STAND BRACKET 1/4" x 1/2" HEX BOLTS 14.
19. Assemble the end of the hitch bracket (two holes) up through the slot at the front of the drawbar tongue. Fasten it to the tongue using the 3/8"x1" hex bolt, 3/8" lock washer and 3/8" hex nut. Tighten. See figure 10. 17. Hold the latch lock lever as shown in figure 8 and place it down through the slot in the draw bar tongue. Assemble the 5/16" x 4" hex bolt through the tongue, the lever and two 5/16" SEMS nuts (one on each side of the lever).
22. Assemblea 1" thin washer,a spacer,a 1" thick washer(model45-0350only),a wheelwiththevalve stemfacingout, andanother1" thinwasherontoa wheelaxle. Insert a cotter pin into the axle and spreadthe ends.Repeatfor theotherthreewheels. Seefigure12. NOTE: Eightextra1"thinwashersareprovidedto take upendplayif necessary. ASSEMBLING RAILS - MODEL 45-0350 ONLY 29. Assemble seven rail braces to the top flange on the sides and the front of the cart bed.
OPERATION CAUTION: MAINTENANCE Vehicle braking and stabil- 1. 2. an or an attachment. Be aware ity accessory may be affected with the addition of of changing conditions on slopes. 3. 4. 1. 2. 3. 4. Refer to the vehicle operator's manual for instructions on safe operation on slopes. Always operate at reduced speed on slopes. Do not operate an ATV towing the cart on a slope greater than 15 degrees. Do not operate a tractor towing the cart on a slope greater than 10 degrees.
o_ UJ _._=_ _ •_ 0 _ "- UJ sF_ 0 .'2_0 --_ .,-.' O u) u) ._ -_ .,., =.. ¢ ,,.. _n- _ CAUTION: A SLOPE DO NOT OPERATE YOUR TRACTOR AND CART ON IN EXCESS OF 10 DEGREES. BE SURE OF YOUR TRACTOR'S TOWING AND BRAKING CAPABILITIES BEFORE OPERATING ON A SLOPE. AVOID ANY SUDDEN TURNS OR MANEUVERS WHILE ON A SLOPE.
REPAIR PARTS FOR CART MODEL NO'S. 45-0350, MODEL NO. 45-0350 45-0351 ONLY 44 34 / / 43 / / 19 / I 4 17 20 17 / 12 19 21 22 29 \ w 13 16 B 27 45 \ 9 10 18 25 15 ,7 26 ..... v // \\, '14 \15 10 23" _ 24 _ ;
REPAIR PARTS FOR CART MODEL NO'S. 45-0350, REF. NO. PART NO.
$#eedEPmrt_ _ _ to_ REPAIR PARTS Agri-Fab, Inc. 303 West Raymond Sullivan, IL. 61951 217-728-8388 www.agri-fab.com _ www.speedepart.