Use and Care Manual

7
ATTACH THE BOOM SUPPORT BRACKET TO
THE TRACTOR HITCH
STEP 7: (SEE FIGURE 7)
• Attach the boom support bracket to the tractor hitch
using one hex bolt (A), two washers (K), and one hex
nut (G).
A
K
K
G
FIGURE 7
CONNECT TANK HOSE TO THE BOOM
ASSEMBLY
STEP 8: (SEE FIGURE 8)
• Attach the tank hose to the 3/8" tee barb on the boom
assembly .
FIGURE 8
ATTACH WIRE HARNESS TO THE BATTERY
STEP 9: (SEE FIGURE 8)
• Connect the wire harness switch (12) to the wire
harness battery (13).
• Attach the wire harness switch (12) to pump harness.
13
12
FIGURE 9