Instructions

Page 65
Note that, whenever the File Ops function is first used after a USB Flash Drive has been
plugged in or the instrument has been switched off, the files on the Flash Drive will be
interrogated and an information message will appear asking the user to wait for this to take
place.
If the Flash Drive is of large capacity and/or contains a large number of files, the interrogation
could take a long time. If the user wishes to abort this procedure, they may do so by simply
unplugging the Flash Drive. To avoid long delays, it is recommended that Flash Drives
containing large numbers of un-related files are not used.
Note that it is not possible to connect a USB Flash Drive if the USB Link to PC connection is in
place.
9.1.3 Linking to a PC via USB
The USB Type Mini B connector on the left hand side of the instrument is arranged as USB
“device” and is intended exclusively for connection to the USB port of a personal computer for
the transfer of files to or from the internal memory of the instrument.
The connection should be made using the cable supplied, which is a standard USB Mini B plug
to USB Standard A plug. Note that it is not possible to use the USB Link to PC when a USB
Flash Drive is connected.
“Link to PC” mode is selected via Setup/Functions > System/FileOps > File Ops > Link to PC
see section 5.6. When the key is pressed all spectrum analyzer activity is suspended and the
instrument waits for the PC to recognise its Flash based disc drive and “log it on”.
When the link is enabled, the internal drive of the instrument appears on the PC as a removable
disc drive. When in this condition, the PC is in control of the link and file operations are
performed on the PC using Windows Explorer or a similar file system manager.
When in this mode, all of the user area of the internal drive becomes accessible. It is
therefore possible to rename files and directories, delete directories or to add invalid
files. Care must be taken NOT to do this.
The internal drive contains a master folder named PSA within which are five folders: TRACES,
IMAGES, SETUPS, LOGS, and TABLES. Only the correct file types must be placed into these
folders, no files should be placed in the Root folder and no additional folders created.
Note that it is possible to place files with long filenames into the folders provided that the
extension is correct and the files themselves are valid - see section 5.6.2.
The link can be closed by pressing the EXIT hard key. When this happens, the instrument re-
checks its filing system in order to ensure that changes have not been made that would cause
system problems. This may take several seconds.
When this has been completed, normal spectrum analyzer operation resumes.
9.2 File System and File Types
9.2.1 Internal Filing System Organisation
The organisation of the instrument filing system is not visible to the user from within the
instrument. Although a folder system exists, files are automatically placed into, or retrieved
from, the correct folder whenever a particular type of file is being used.
Similarly, when an external flash drive is connected, the instrument will automatically select the
correct external folder for the current file type.
The folder structure of the internal drive is only visible when linked to a PC - see section 9.1.3.
9.2.2 File Types
The basic instrument uses three file types: Traces, Images and Setups. If option U02 is
installed, several further file types become available.