User Manual

SmartyCam

User Manual

Release 1.22 – firmware version 1.03.10

www.smartycam.com

Chapter 2 – Data sampled by SmartyCam stand alone/slave

As mentioned above, according to its working mode, SmartyCam provides different

information.

In Stand Alone mode, SmartyCam gets data from the integrated GPS and three-axial

accelerometer:

• position;

• GPS speed;

• acceleration

• lap time;

• distance;

• track mapping.

When connected to an AIM logger (EVO3 Pro/Pista, EVO4, MXL Strada/Pista/Pro05 or

MyChron4) or an ECU (via ECU bridge), SmartyCam can visualize in graphical overlay:

• all info acquired in Stand Alone mode;

• all info coming from the vehicle ECU;

• all info sampled by the AIM logger (RPM, more speeds, LCU-ONE Lambda value,

engaged gear, temperatures, pressures, etc…).

When Connected to an RPM Bridge gets data from the integrated GPS and three-axial

accelerometer as well as engine RPM:

• position;

• GPS speed;

• acceleration

• lap time;

• distance;

• track mapping;

• engine RPM.

PLEASE NOTE: for further useful information check:

• www.aim-sportline.com website download area to know which ECUs are supported

by AIM loggers and their connection/communication protocols;

• Race Studio Configuration user manual to understand how to configure AIM

loggers, AIM Bridges included;

• each AIM logger user manual.