ProjectorCam QUICK START GUIDE
EN ProjectorCam Contents WEEE Notice ....................................................................... 6 CE Regulatory Notice......................................................... 6 Safety Instructions ............................................................. 7 Projector LED Warning Instructions ................................ 7 Battery Safety Instructions................................................ 8 1 Introduction ...................................................................
EN ProjectorCam 3 Using the Digital Video Camera.................................22 3.1 Recording videos ..................................................22 3.1.1 3.2 3.3 3.4 3.5 Video menu ............................................................25 3.2.1 Quality ..........................................................25 3.2.2 Pre-recording ................................................26 3.2.3 Time Lapse ...................................................27 3.2.4 Motion Detection ...
EN ProjectorCam 3.6.5 AE Meter .......................................................46 3.6.6 AE ISO ..........................................................46 3.6.7 Digital Effect..................................................47 3.6.8 Digital Zoom..................................................48 3.7 Viewing photos ......................................................49 3.8 Photo playback settings .......................................51 3.9 4 3.8.1 Protect File ..................
EN ProjectorCam 5 4.1.11 Beep Sound ..................................................66 4.1.12 Start Logo .....................................................67 4.1.13 Anti-flicker .....................................................67 4.1.14 Recording Audio Gain ...................................68 4.1.15 SD ...............................................................69 4.1.16 Auto Hide Info ...............................................69 Connecting to other devices ................
EN ProjectorCam FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
ProjectorCam EN WEEE Notice Disposal of Waste Electrical and Electronic Equipment and/or Battery by users in private households in the European Union This symbol on the product or on the packaging indicates that this can not be disposed of as a household waste. You must dispose of your waste equipment and/or battery by handling it over to the applicable take-back scheme for the recycling of electrical and electronic equipment and/or battery.
EN ProjectorCam Safety Instructions Do not expose the device to rain or use it in areas near water. Do not wrap the device or store it in a hot environment. Do not place the device on unstable surfaces or near any heat sources such as stoves, heaters, or etc. Clean only with dry cloth. Do not subject the LCD display to impact. Keep the battery out of reach of children. When inserting battery, pay careful attention to the polarity of the terminals. Do not fire the flash close to anyone’s eyes.
EN ProjectorCam Battery Safety Instructions Use the authorized charger only. Never disassemble by yourself. Never short-circuit the battery. Dispose of the battery properly. Exposing the battery to open flames can cause explosion. Ambient temperature for placing or storing battery must not exceed 80℃ (176℉). Upper temperature limit for long-term battery storage must be no more than 60℃ (140℉). Make sure the limit is not exceeded for more than 24 hours, or the battery may distend and cause danger.
EN ProjectorCam 1 Introduction Thank you for purchasing this advanced Digital Video Camera. This user guide will get you started and ready to make the most of your digital video camera. 1.1 System requirements For PC connection, be sure your PC meets the following specifications: For Windows: • • • • • • • • Windows XP SP2 / Vista / Win 7 Processor with at least Pentium IV 3.2GHz / AMD Athlon FX 2.
EN ProjectorCam 1.2 Features • • • • • • • • • • Full HD (1920 x 1080p) camcorder with embedded Pico \ projector 10X optical zoom with real‐time auto focus 3’’ (7.6 cm) touch LCD display Projects pictures up to 50‘’ (127 cm) diagonal Projector with DLP optical technology and RGB Pre-recording Time lapse recording Motion detection recording Slideshow Dual memory card slot 1.3 Package contents The package contains the following items.
EN ProjectorCam 1.4 External view Top, Bottom, and Front views Bottom View Top View 4 5 1 2 3 Front View 9 6 7 10 8 No. Item No.
EN ProjectorCam Left, Right, and Rear views Left View Right View 2 1 Rear View 4 5 3 No. 1 Item No.
EN ProjectorCam 1.5 Buttons operation See the table below for a description of each button’s function. Item Function Power Button Press to turn the digital video camera on or off. Record Button • In Video mode, press to start recording a video. Press it again to stop recording. • In Camera mode, press to capture a photo. Zoom Lever • In Video and Camera modes, slide to the right/left to zoom in/out when recording videos or shooting photos.
EN ProjectorCam 1.6 Adjusting the LCD display Flip the LCD display outwards 90° to fully open. Flip and twist the LCD screen at the appropriate angle to suit your viewing preference.
ProjectorCam EN 2 Getting Started 2.1 Inserting the memory card(s) This device supports dual memory card slot that allows you to insert two memory cards at the same time. You can insert one SD card and one micro SD card into the digital video camera. 1. Push the battery/memory card cover latch to open the battery/memory card cover as shown in the illustration. 2. Insert the memory card(s).
ProjectorCam 3. EN Close the battery/memory card cover. Note: Do not remove or insert the memory card when the digital video camera is turned on. This may damage the memory card.
EN ProjectorCam 2.2 Inserting the battery Only use the specified rechargeable battery for the digital video camera. 1. Push the battery/memory card cover latch to open the battery/memory card cover as shown in the illustration. 2. Fully insert the battery with the correct orientation until it clicks into place.
EN ProjectorCam 3. Close the battery/memory card cover. Note: 1. Turn off the digital video camera before removing the battery. 2. The battery may be warm after being used. This is normal and not a malfunction. To remove the battery: 1. Push the battery/memory card cover latch to open the battery/memory card cover. 2. Press and hold the latch as shown in the illustration and remove the battery from the battery compartment.
EN ProjectorCam 2.3 Charging the battery Use the supplied power adapter to charge the battery. 1. Open the USB/HDMI connector cover. 2. Connect one end of the power adapter to the USB connector of the digital video camera. 3. Plug the other end of the power adapter to the wall outlet. Note: 1. The red LED lights up while the battery is charging. 2. The charging time depends on the current battery capacity and charging conditions. 3.
EN ProjectorCam 2.4 Turning on/off the digital video camera There are two ways to turn on/off the power: • Open/close the LCD panel. • Press the Power button. 2.5 Changing modes The digital video camera has two recording modes: • Video mode: Record videos. • Camera mode: Shoot photos. By default, the digital video camera is set to Video mode. In Video mode, touch the upper left corner icon ( ) to switch to Camera mode.
EN ProjectorCam 2.6 Initial Settings Before using the digital video camera, you may want to set up the date and time and screen language settings. 2.6.1 Setting the date and time 1. To adjust the field item, touch the respective field to select the field and touch / to adjust the value. 2. Repeat step 1 to adjust other fields. 3. Touch to save your changes. Note: Touch / 2.6.2 1. to adjust the value. Touch / to go to the previous/next field.
EN ProjectorCam 3 Using the Digital Video Camera 3.1 Recording videos 1. Turn on the digital video camera. By default, the device is set to Video mode. In Camera mode, touch mode. 2. to switch to Video Press the Record button to start recording the video. Press it again to stop recording. While recording, you can also use the Zoom lever to zoom/in on the subject. 3.1.1 The recording screen 6 7 8 10 11 9 1 12 2 3 4 13 5 16 14 15 No.
EN ProjectorCam No. Icon Item Description Indicates the memory card type in use. 2 Card type 3 White balance 4 Metering mode 5 Menu 6 Motion detection Indicates Motion detection recording mode is activated. 7 Video resolution Touch to select the desired video resolution. Available options: FHD / HD (60) / HD (30) 8 AF setting Touch to select the desired AF setting. Available options: AF / Lock 9 LED icon Touch to select the suitable lighting mode.
EN ProjectorCam No. Icon Item 12 Battery status 13 Zoom indicator 14 Time lapse 15 16 Description Indicates the remaining battery power. Indicates the zoom status. Indicates the Time lapse recording is set to 5 minutes. Indicates the current EV compensation. EV compensation Touch / to adjust the EV value. Playback Touch to enter Playback mode.
EN ProjectorCam 3.2 Video menu The Video menu is used to adjust settings in Video mode. 1. Turn on the digital video camera. By default, the device is set to Video mode. In Camera mode, touch mode. to switch to Video 2. Touch to enter the Video menu. 3. Touch the desired menu option to enter the menu. 4. Touch an option to select the desired setting. 5. Touch to exit the menu. Note: Touch / to scroll through the available menu options. Touch previous/next page. 3.2.
EN ProjectorCam 3.2.2 Pre-recording Pre-recording function records images 3 seconds before you press the Record button. 1. In Video mode, touch enter the Video menu. to 2. Touch Pre-recording to enter the menu. 3. Touch the option to select On or Off. Note: If Pre-recording is enabled, Time Lapse and Motion Detection will be disabled.
EN ProjectorCam 3.2.3 Time Lapse With the Time Lapse feature, the camcorder records 1 frame every 1 minute, 5 minutes, or every 30 minutes depending on the setting. For instance, when choosing time lapse as 1 minute at Full HD 30 fps, 720 frames are recorded during 12 hours of recording period. The length of the video clip will be 24 seconds (720 frames / 30 fps = 24 seconds). When playing back the video, you are given the impression that the video is playback in fast forward speed.
EN ProjectorCam • 5 min: 5-minute time lapse recording. • 30 min: 30-minute time lapse recording. Note: If Time Lapse is enabled, Pre-recording and Motion Detection will be disabled. 3.2.4 Motion Detection With Motion Detection feature, the video recording automatically starts if the digital video camera detects any movement. to 1. In Video mode, touch enter the Video menu. 2. Touch Motion Detection to enter the menu. 3. Touch the option to select On or Off.
EN ProjectorCam 3.2.5 White Balance Set the white balance when recording videos under specific lighting conditions. 1. In Video mode, touch enter the Video menu. to 2. Touch White Balance to enter the menu. 3. Touch an option to select the desired setting. • Auto: Set the white balance automatically. • Incandescent: Indoor under tungsten lighting condition. • Sunny: Bright daylight shooting. • Cloudy: Cloudy day or shady condition. • Fluorescent: Indoor under fluorescent lighting.
EN ProjectorCam desired setting. • Average: Calculate exposure based on the entire image area. • Center: Calculate exposure based on the entire image area, but provides greater exposure to the center of a subject. • Spot: Calculate exposure based on the small portion of the screen center. 3.2.7 Digital Effect Set the color filter effect to be applied on the video you want to record. 1. 2. 3. In Video mode, touch to enter the Video menu. Touch Digital Effect to enter the menu.
EN ProjectorCam 3.2.8 Digital Zoom Set whether or not to use digital zoom when recording videos. 1. In Video mode, touch enter the Video menu. 2. Touch Digital Zoom to enter the menu. 3. Touch the option to select On or Off.
EN ProjectorCam 3.3 Playback videos 1. In Video mode, touch to enter Video Playback mode. 2. Touch the video to view it in full screen. 3. Touch 4. Touch the corresponding icons to adjust the volume and playback speed. to play the video. Note: You can also slide the zoom lever right or left to adjust the playback volume. 5 9 6 7 8 1 10 2 11 3 12 13 4 14 No. Icon Item Description 1 Playback mode Indicates the digital video camera is in Video Playback mode.
EN ProjectorCam No. Icon Item Description Touch to decrease playback volume. 3 Volume down 4 Menu 5 File number Indicates the file number. 6 Slow motion Touch to enable or disable slow motion playback. 7 Video resolution 8 Protect Indicates the file is protected. 9 Time duration Indicates the played duration / total video duration. 10 Battery status Indicates the remaining battery power. 13 14 Indicates the file resolution. Previous Touch to view the previous video.
EN ProjectorCam 3.3.1 Slow motion playback To start playback in slow motion: 1. In Video mode, touch 2. Touch the video to view it in full screen. 3. Touch to enable slow motion feature. The icon turns orange. 4. Touch 5. During playback: 6. to enter Video Playback mode. to play the video. • Touch to adjust the fast-forward speed 1/2X ~ 1/64X. • Touch to adjust the rewind speed 1/2X ~ 1/64X. Touch the orange to disable slow motion. Note: 1.
EN ProjectorCam 3.3.2 Capturing a still image in video playback This function allows an image to be captured from the video being played. 1. 2. In Video mode, touch to enter Video Playback mode. Touch the video to view it in full screen. 3. Touch playback. 4. Press the Record button to capture the image. The file will be saved automatically.
EN ProjectorCam 3.4 Video playback settings 3.4.1 Protect File 1. In Video mode, touch 2. Select the desired video file that you want to protect. 3. Touch Playback ( to enter Video Playback mode. to enter the Video ) menu. 4. Touch Protect File to enter the menu. 5. Touch an option to select the desired setting. • Protect One: Protect the current file. • Unprotect One: Unprotect the current file. • Protect All: Protect all files. • Unprotect All: Unprotect all files.
EN ProjectorCam 3.4.2 Play Option 1. In Video mode, touch 2. Touch the selected video file to view it in full screen. 3. Touch Playback ( to enter Video Playback mode. to enter the Video ) menu. 4. Touch Play Option to enter the menu. 5. Touch an option to select the desired setting. • Play One: Playback on the current video. • Play All: Playback all videos. • Repeat One: Replay the current video. • Repeat All: Replay all videos.
EN ProjectorCam 3.4.3 Delete File 1. In Video mode, touch to enter Video Playback mode. 2. Select the desired video file that you want to delete. 3. Touch 4. Touch Delete File to enter the menu. 5. Touch an option to select the desired setting. to enter Video Playback ( ) menu. • Delete this file: Delete the current file. • Delete all files: Delete all files. • Delete Selection: Delete the selected files. Touch the desired files to mark them.
ProjectorCam 6. Touch EN to confirm delete. Note: Deleted files cannot be recovered. Ensure the files have backup before deletion. Protected files cannot be deleted, unlock the file first.
EN ProjectorCam 3.5 Shooting photos 1. Turn on the digital video camera. By default, the device is set to Video mode. 2. Touch 3. Press the Record button to capture a photo. 3.5.1 to switch to Camera mode. The shooting screen 6 2 3 9 8 10 1 11 2 3 4 12 13 14 15 16 5 17 No. 1 7 Icon Item Description Indicates the digital video camera is currently in Camera Camera mode mode. Touch to switch to Video mode. Card type Indicates the memory card type in use.
EN ProjectorCam No. Icon Item Description balance mode. 4 Metering mode 5 Menu Indicates the current AE metering mode. Touch to enter the Camera menu. Photo size Touch to select the desired photo size. Available options: 16M / 12M / 8M / 5M / 3M. 7 AF setting Touch to select the desired AF setting. Available options: Normal / Macro / Lock 8 LED icon Touch to select the suitable lighting mode. Available options: Off / On 6 Touch to select the desired scene mode.
EN ProjectorCam No. Icon Item 12 Zoom indicator 13 ISO 14 Capture mode 15 Self-timer 16 17 Description Indicates the zoom status. Indicates the current AE ISO mode. Indicates the Capture Mode is set to Continue Shot. Indicates the Self Timer mode is set to 10 seconds. Indicates the current EV compensation. EV compensation Touch / to adjust the EV value. Playback Touch to enter Playback mode.
EN ProjectorCam 3.6 Camera menu The Camera menu is used to adjust the capture settings in Camera mode. 1. Turn on the digital video camera. By default, the device is set to Video mode. 2. Touch to switch to Camera mode. 3. Touch to enter the Camera menu. 4. Touch the desired menu option to enter the menu. 5. Touch an option to select the desired setting. 6. Touch to exit the menu. Note: Touch / to scroll through the available menu options. Touch previous/next page. 3.6.
ProjectorCam EN • Normal: Shoot one photo at a time. • Continue Shot: Continuously shoot photos as long as you keep pressing the Record button. Note: 1. If Capture Mode is set to Continue Shot, Instant View and Self Timer will be disabled. 2. The Continue Shot function will be disabled if the Photo size is set to 16M / 12M / 8M. 3.6.2 Instant View Display a preview of the recorded photo right after the shot is taken. 1. In Camera mode, touch to enter the Camera menu. 2.
EN ProjectorCam 2. Touch Self Timer to enter the menu. 3. Touch an option to select the desired setting. • Off: Disable this feature. • 2 sec: 2-second delay self timer. • 10 sec: 10-second delay self timer. 3.6.4 White Balance Set the white balance when shooting photos under specific lighting conditions. 1. 2. 3. In Camera mode, touch to enter the Camera menu. Touch White Balance to enter the menu. Touch an option to select the desired setting. • Auto: Set the white balance automatically.
ProjectorCam 3.6.5 EN AE Meter Select the metering method for calculating the exposure. 1. In Camera mode, touch to enter the Camera menu. 2. Touch AE meter to enter the menu. 3. Touch an option to select the desired setting. • Average: Calculate exposure based on the entire image area. • Center: Calculate exposure based on the entire image area, but provides greater exposure to the center of a subject. • Spot: Calculate exposure based on the small portion of the screen center. 3.6.
EN ProjectorCam 3. Touch an option to select the desired setting: Auto (100-400), Auto800 (100-800), Auto1600 (100-1600), 100, 200, 400, 800, 1600. Note: Use a higher ISO setting in dim conditions and a lower ISO setting in brighter conditions. 3.6.7 Digital Effect Set the color filter effect to be applied on the photo you want to capture. 1. 2. 3. In Camera mode, touch to enter the Camera menu. Touch Digital Effect to enter the menu. Touch an option to select the desired setting.
EN ProjectorCam 3.6.8 Digital Zoom Set whether or not to use digital zoom when capturing photos. 1. In Camera mode, touch to enter the Camera menu. 2. Touch Digital Zoom to enter the menu. 3. Touch the option to select On or Off.
EN ProjectorCam 3.7 Viewing photos 1. Turn on the digital video camera. By default, the digital video camera is set to Video mode. 2. Touch to switch to Camera mode. 3. Touch to enter Photo Playback mode. 4. Touch the photo to view it in full screen. 3 4 5 6 1 7 8 9 10 11 2 No. Icon Item Description 1 Playback mode Indicates the digital video camera is in Photo Playback mode. 2 Menu Touch to enter the Photo Playback menu. 3 File number Indicates the file number.
EN ProjectorCam No. Icon Item Description 4 Photo size Indicates the file resolution. 5 Protect Indicates the file is protected. 6 DPOF tag Indicated the file is marked for printing. 7 Battery status Indicates the remaining battery power. 8 Previous 9 Next 10 T (zoom in) 11 Return Touch to view the previous photo. Touch to view the next photo. Touch to zoom in the photo up to 10X. Touch to return to the previous screen.
EN ProjectorCam 3.8 Photo playback settings 3.8.1 Protect File 1. In Camera mode, touch 2. Select the desired photo file that you want to protect. 3. Touch to enter Photo Playback mode. to enter the Photo Playback ( ) menu. 4. Touch Protect File to enter the menu. 5. Touch an option to select the desired setting. • Protect One: Protect the current file. • Unprotect One: Unprotect the current file. • Protect All: Protect all files. • Unprotect All: Unprotect all files.
EN ProjectorCam 3.8.2 Slide Show 1. In Camera mode, touch 2. Select the desired photo file that you want to start the slide show first. 3. Touch Playback ( to enter Playback mode. to enter the ) menu. 4. Touch Slide Show to enter the menu. 5. Touch the option to select On to enable the slide show. The slide show starts right away. 6. Touch to stop.
EN ProjectorCam 3.8.3 Delete File 1. In Camera mode, touch 2. Select the desired photo file that you want to delete. 3. Touch Playback ( to enter Photo Playback mode. to enter Photo ) menu. 4. Touch Delete File to enter the menu. 5. Touch an option to select the desired setting. • Delete this file: Delete the current file. • Delete all files: Delete all files. • Delete Selection: Delete the selected files. Touch the desired files to mark them.
ProjectorCam 6. Touch EN to confirm delete. Note: Deleted files cannot be recovered. Ensure the files have backup before deletion. Protected files cannot be deleted, unlock the file first.
EN ProjectorCam 3.8.4 DPOF Note: A memory card is required for DPOF function. 1. 2. 3. 4. 5. In Camera mode, touch to enter Photo Playback mode. Select the desired photo file that you want to set the DPOF tag. Touch to enter the Photo ) menu. Playback ( Touch DPOF to enter the menu. Touch an option to select the desired setting. • DPOF One: Set the number of print on the current file. • DPOF All: Set the number of print on all files. • Reset One: Remove the DPOF tag on the current file.
EN ProjectorCam 3.8.5 Rotate 1. In Camera mode, touch to enter Photo Playback mode. 2. Select the desired photo file that you want to rotate. 3. Touch to enter the Photo Playback ( ) menu. 4. Touch Rotate to enter the menu. 5. Touch an option to select the desired setting. • Left 90: Rotate the image 90° counter-clockwise. • Right 90: Rotate the image 90° clockwise.
EN ProjectorCam 3.9 Using the built-in projector Activate the projector function to project videos or photos. 3.9.1 Activate the projector function 1. In Video/Camera mode, touch /Photo Playback mode. to enter Video Playback 2. Touch the video to view it in full screen. 3. Touch 4. / can be used for Volume Control when The Zoom Lever video is being played back. to activate the Projector function.
EN ProjectorCam 3.9.2 Projector buttons operation See the table below for a description of each button’s function. 1 2 5 3 4 No. Icon Item Description Touch to view the previous video/photo. 1 Previous 2 Play 3 Projector 4 Return Touch this button to stop Projector function 5 Next Touch to view the next video/photo. Video Playback mode: Play/Stop Photo Playback mode: Slide Function On/Off Touch this button to activate the Projector function Note: 1.
EN ProjectorCam 4 Using Setup menu 4.1 Setup menu Configure the digital video camera general settings. 1. Turn on the digital video camera. By default, the device is set to Video mode. In Camera mode, touch mode. 2. Touch menu. to switch to Video to enter the OSD menu and switch to Setup ( • In Video mode, touch menu. • In Camera mode, touch menu. ) twice to switch to Setup ( to switch to Setup ( 3. Touch the desired menu option to enter the menu. 4.
EN ProjectorCam 4.1.1 System Set the TV type based on your local region. 1. Switch to Setup ( 2. Touch System to enter the menu. 3. Touch the option to select NTSC or PAL. 4.1.2 ) menu. File Number Set the file numbering type for recorded files. 1. Switch to Setup ( 2. Touch File Number to enter the menu. 3. Touch an option to select the desired setting. • Reset: Reset the file number to 0001. • Serial: Continue the file numbering from the last recorded file. ) menu.
EN ProjectorCam 4.1.3 Time Setup Set the date and time settings. 1. Switch to Setup ( 2. Touch Time Setup to enter the menu. 3. To adjust the field item, touch the respective field to select the field. 4. Touch value. 5. Repeat step 3~4 to adjust other fields. 6. Touch / ) menu. to adjust the to save your changes. Note: Touch / 4.1.4 to adjust the value. Touch / to go to the previous/next field. Format Format the memory card. 1. Switch to Setup ( 2.
EN ProjectorCam 4. When the “Format successful!” message appears, touch 4.1.5 to exit the menu. Default Setting Reset the digital video camera settings to its factory defaults. 1. Switch to Setup ( 2. Touch Default Setting to enter the menu. 3. Touch 4. ) menu. to reset. When the “Operation done!” message appears, touch to exit the menu.
EN ProjectorCam 4.1.6 LCD Brightness Set the LCD display brightness. 1. Switch to Setup ( 2. Touch LCD Brightness to enter the menu. 3. Touch an option to select the desired setting. ) menu. • Normal: Maintain the brightness level as the default setting. • High: Increase the brightness level. • Auto: Automatically adjust the brightness level based on the surrounding environment. 4.1.7 Date/Time Stamp Disable the date/time stamp or select the date/time stamp type when shooting a photo. 1.
EN ProjectorCam • Off: Disable the date/time stamp. • Date: Enable the date stamp only. • Date/Time: Enable date and time stamp. 4.1.8 Auto Power Off Set the digital video camera to automatically turn off if it is left idle for a preset time. ) menu. 1. Switch to Setup ( 2. Touch Auto power off to enter the menu. 3. Touch an option to select the desired setting. • Off: Disable the Auto Power Off function.
EN ProjectorCam 4.1.9 Language Set the on-screen display language. 1. Switch to Setup ( 2. Touch Language to enter the menu. 3. Touch the language option to select the desired language. ) menu. Note: Touch / to scroll through the available menu options. Touch previous/next page. / to go to the 4.1.10 Information Select the information type to be displayed on the preview screen. 1. Switch to Setup ( 2. Touch Information to enter the menu. ) menu.
EN ProjectorCam 3. Touch an option to select the desired setting. • Normal: Display basic information on the preview screen. • Advance: Display detail information on the preview screen. 4.1.11 Beep Sound Enable/Disable the beep sound. ) menu. 1. Switch to Setup ( 2. Touch Beep Sound to enter the menu. 3. Touch the option to select On or Off.
EN ProjectorCam 4.1.12 Start Logo Set the start up image to be displayed on the screen when the digital video camera is turned on. 1. Switch to Setup ( 2. Touch Start Logo to enter the menu. 3. Touch an option to select the desired setting. ) menu. • Default: Use the default start-up logo. • User Setting: Use one of the captured photos as the start-up logo. 4.1.13 Anti-flicker Set the refresh rate of the digital video camera. 1. Switch to Setup ( ) menu. 2.
EN ProjectorCam 3. Touch an option to select the desired setting. • Auto: Automatically adjust the frequency system based on the System setting. • 60Hz: Set the frequency system to 60Hz. • 50Hz: Set the frequency system to 50Hz. 4.1.14 Recording Audio Gain If the automatic volume gain function is enabled and the recording volume is increased, subtle sounds and dialogue are recorded as clearly as possible.
EN ProjectorCam 4.1.15 SD Select the memory card type to be used as the default storage. 1. Switch to Setup ( 2. Touch SD to enter the menu. 3. Touch the option to select micro SD or SD. ) menu. 4.1.16 Auto Hide Info Select whether or not to automatically hide the information icons shown on the screen. 1. Switch to Setup ( 2. Touch Auto Hide Info to enter the menu. 3. Touch the option to select On or Off. ) menu.
EN ProjectorCam 5 Connecting to other devices 5.1 Connecting to the computer You can connect the device to a PC or notebook to transfer or view files as well as charge the device. 1. Turn on the digital video camera. 2. Open the USB/HDMI connector cover. 3. Connect one end of the USB cable to the device. 4. Connect the other end of the USB cable to an available USB port on your computer. 5. After the connection is established, a “Removable Disk” icon appears in “My Computer”.
EN ProjectorCam 5.2 Connecting to TV You can play files in your digital video camera on a TV using an HDMI cable. 1. Turn on the digital video camera. 2. Open the USB/HDMI connector cover. 3. Connect one end of the HDMI cable to the digital video camera. 4. Connect the other end of the HDMI cable to an HDMI TV. 5. Turn on the TV, and then switch the input source of the TV to “HDMI”. 6. Follow the on-screen instructions to operate the device via the TV. Note: 1.
ProjectorCam EN 6 Installing the Software 1. Insert the supplied CD-ROM in a CD-ROM drive. 2. An Autorun screen will be displayed. If the Autorun screen is not displayed, go to My Computer > CD-ROM and double-click Install_CD.exe. 3. Click the respective software name. Follow the on-screen instructions to complete the software installation.
EN ProjectorCam 7 Editing software ArcSoft Total Media Extreme (TME) ™ manages your media for you, and gives you tons of fun and exciting ways to create and share projects featuring your photo, video, and music files. Edit, enhance and add creative effects to your photos. You can • Create your own movies or photo slide shows complete with soundtrack. • Upload your files easily to YouTube™! • Or share them through simple email attachments or popular photo printing. • You can go to http://www.
EN ProjectorCam 8 Specifications Specifications Image sensor 1/3.2” CMOS sensor Effective pixels 5.0 Megapixels (2592 x 1944) Storage media Supports (Micro) SDHC, up to 32GB class 4 or above 10X Optical zoom lens Lens F2.8-F3.5, f=4.
EN ProjectorCam Specifications Slow Motion Off: 2X ~ 64X Resolution:16M (4608x3456, by interpolation), 12M (4000x3000, by interpolation), 8M (3200x2400, by interpolation), 5M (2592x1944), Still image 3M (2048x1536) Format: DCF 1.1 (JPEG, Exif2.2) Playback: 10x digital zoom TFT screen 3.0” Touch Panel screen (16:9) Assist Lamp White LED: effective distance 1 m Shutter Exposure Electronic shutter Auto:1/2 ~1/2000 sec, Night: 2~1/2000 sec.
EN ProjectorCam Specifications Battery Operating Temperature Operating Humidity Dimensions Weight 1200 mAH CA NP-40 Lithium-ion rechargeable battery 0° ~ 40° C 20 ~ 70% RH 124 x 63.7 x 58.6 mm Approx.
