Quick Start Guide

Page 19
ProjectorCam
EN
2.3 Charging the battery
Use the supplied power adapter to charge the battery.
1. Open the USB/HDMI connector cover.
2. Connect one end of the power adapter to the USB connector of
the digital video camera.
3. Plug the other end of the power adapter to the wall outlet.
Note:
1. The red LED lights up while the battery is charging.
2. The charging time depends on the current battery capacity and charging conditions.
3. Please take note if the environment temperature reaches 45
°
C or above, the adapter can
still supply power to the digital video camera, but it will not charge the Lithium-ion battery.
This is the characteristic of Lithium-ion and is not a malfunction.