User Manual

MN-957
13
Inside
view of
right-side
mounted
assembly
g. 31
FINISHING THE INSTALLATION
For 2WD models it will be necessary to trim the Brake/ABS line holder that is closest to
the axle so that it does not chafe on the driver side bellows.
1. Trim the outboard open slot on the plastic line holder off using a hack saw or side
cutters (fig. 32). Finished photo shown in fig. 33.
g. 32
g. 33
Trim
Brake/ABS
line holder
off here.
LoadLifter 5000