User Manual

MN-957
5
GETTING STARTED
1. Lift the vehicle up and support the frame with jack stands. Leave enough room to
drop the axle down low enough to install the air spring assemblies into position
between the axle and the frame (fig. 2).
2. In order to install the assemblies, the jounce bumpers and cups will need to be
removed (fig. 3). Figure 4 shows the driver-side frame with the jounce bumper
removed.
LoadLifter 5000
Installing the LoadLifter 5000 System
g. 4
g. 3
g. 2