Use and Care Manual

6
ACTIVATING CONTROLS:
10) Remove remote control from
plastic wrapping and extract
plastic tab from bottom
.
11) Point the remote control
toward the controls on the unit
and press the humidity level
button momentarily.
12) The unit should now be
activated, and the front and
remote controls should be
active. The power icon on the
front will be illuminated.
VAPOR INTENSITY/TYPE
13) The Spire has three levels of output. Adjust the flow of
mist with the humidity level button on the remote control,
or by pressing the Power button on the base.
The intensity levels cycle from high to low output.
The Power icon on the unit changes color to indicate
humidity output flow:
Red icon = high flow
Green icon = medium flow
Yellow icon = low flow
NOTE: The Spire’s default setting is cool mist.
14) Change the mist from cool to warm by pressing the heater
button.
NIGHTLIGHT FEATURE
The Spire’s base has a soothing blue nightlight which can be turned on
from the light bulb button on the remote control, or the circle symbol
on the base.
The light extinguishes when the unit is turned off.
AROMATHERAPY FEATUR
E
The aroma tray that rests in the top of
the water tank has a foam pad to add
essential oils. The mist output will
disperse the aroma throughout the
area.
Any essential oil that is
recommended for diffusers is
appropriate for use with this unit.
Various essential oils, including:
Vanilla, Lavender and Eucalyptus are
available individually or in a three
pack at www.aircareproducts.com or
by calling 1.800.547.3888.