Use and Care Manual
9
TROUBLESHOOTING
Problem
Solution
Unit does not turn on • Check that unit is plugged in and outlet
has power.
• Check that unit is turned on.
Red light blinks • Check that unit has water.
Refill tank.
• Verify tank cap is secured tightly and
water tank is positioned correctly on
base.
Humidifier is not putting out
enough vapor.
• Insufficient water in tank.
Refill tank.
• Ensure unit is on level surface, not
inclined.
• Check that water tank is installed onto
base correctly.
• Check that output is set to correct level.
• Make sure oscillator is not damaged.
Strange smell coming from unit
•
If first time use, this is normal and will
dissipate shortly.
• The humidifier may be growing bacteria.
Clean unit according to maintenance
instructions, page 7.
• Transducer may be dirty. Unplug unit and
clean transducer as described on page 7.
Water is leaking from unit • The water cap is not securely tightened.
• The water tank is not situated correctly
on the base
• The unit has been moved or jostled,
allowing water to spill.
White dust appears on surfaces
near humidifier.
• Remove and replace demineralization
cartridge. If it continues, change to
filtered or distilled water.