User manual

Step C Connect Equipment
You may use up to two Airfonix R Series wireless receivers with each T Series transmitter. This is useful when the
speakers are spaced far apart. To view examples diagrams for the six installation scenarios look in the User Manual.
Make sure to set the correct zone codes for your installation.
AFX-19AR050: Designed for use with semi-pro or home audio equipment. Use speaker cables to connect either
two passive speakers at 25W per channel or one passive speaker at 50W per channel with banana plug connectors.
AFX-19PR001: Designed for use with professional active speakers. Connect using XLR audio cables or RCA stereo
audio jacks.
Airfonix T Series wireless transmitters may be connected to any audio product with a speaker output connection
such as stereo receivers, digital TVs, DVD players, CD players, professional mixing consoles, gaming products,
computers, iPods or MP3 players.
AFX-19PT002: Designed for use with professional audio equipment. Connect using XLR audio cables into Balance
In, optical cable into digital SPDIF input jack or RCA stereo cable into RCA jacks.
AFX-19PT102: Designed for use with semi-pro or home audio equipment. Connect using speaker cables into Hi-
Level IN push terminals, RCA stereo cable into RCA jacks or optical cable into digital SPDIF input jack.
IMPORTANT: To avoid physical injury or damage to your equipment, we recommend you disconnect the units
from the DC power adaptors and all components from their power sources until you complete the connections.
!
Connecting the Receivers
Connecting the Transmitter
Technical Support and additional information
IMPORTANT:
When using model • AFX-19PT002, to prevent signals mixing together, do not connect
source to both the AUX L and R RCA jacks and the BALANCE IN sockets simultaneously.
When using model • AFX-19PT102, to prevent signals mixing together, do not connect
source to both the AUX L and R RCA jacks and the HI-LEVEL IN sockets simultaneously.
When connecting an audio source using the SPDIF input, it must use either 44.1KHz or •
48KHz sampling rates. Check the owner’s manual for your audio source if you are unsure.
Use supplied optical cable to connect HDTV to SPDIF input jack.•
!
IMPORTANT:
When using model • AFX-19AR050 and connecting one receiver to one speaker the output
will be 50W per channel. When connecting both speakers it will be 25W per channel.
When using model • AFX-19PR001, to prevent signals mixing together, do not connect
source to both the AUX L and R RCA jacks and the BALANCE IN sockets simultaneously.
T•
he system will accommodate 4 to 8 ohms output. Any system with 70V will not work
with these products.
!
IMPORTANT: Your system will not work properly unless the dip switches on each unit are set to the
correct positions for your installation.
If the LINK LEDs light green, double check the Zone Codes. •
If the LINK LEDs are not lit, go through the steps to Pair Units again. •
Look in the User Manual for Troubleshooting Guide, or contact Customer Service at [phone] or •
www.airfonix.com if you are having problems.
!
Copyright © 2008, Airfonix. All rights reserved.
Please visit www.airfonix.com for:
Information and help with troubleshooting and support issues.•
To contact customer service. •
United States customers may contact customer service at [phone]. For other countries, visit www.•
airfonix.com to nd the correct telephone number for your country.
For the latest product documentation, as well as the Airfonix License Agreement and Limited Warranty. •