- Airlink+ Network Router User Manual

Host RJ-11 IP Gateway User Guide, version 15

Installation

FIGURE 15. Host RJ-11 IP Gateway: Serial Settings

For more information on these settings, refer to page 21.

FIGURE 16. Host RJ-11 IP Gateway: Reset/Reboot

Click the Reboot button to restart the Host RJ-11 IP Gateway with the configured settings.

Note: For most configurations, the default settings are best. Change these parame-

ters only if you know the device you will be connecting to the Host RJ-11 IP Gate-

way requires special settings.

Click on the Reset/Reboot menu option for the IP Address configuration and any changes to the

serial port settings to take effect.

8None