- Airlink+ Network Router User Manual

Host RJ-11 IP Gateway User Guide, version 17
Hardware
FIGURE 3. Host RJ-11 IP Gateway Top Panel (not to scale)
• STATUS - Indicates the overall status of the device.
TABLE 1. Status - Normal Operation
LED Condition Description
Blinking Yellow The Host RJ-11 IP Gateway is starting up.
Solid Green The Host RJ-11 IP Gateway is obtaining an IP address from
the modem.
Blinking Green The Host RJ-11 IP Gateway has an IP address and is operat-
ing normally.
Off No power to the Host RJ-11 IP Gateway.
TABLE 2. Status - Resetting the Configuration
LED Condition Description
Alternating Green/Red While the Reset button is held in, the status light will begin
to blink in this sequence to indicate the Host RJ-11 IP Gate
-
way will shortly restore the factory default condition.
If you do not want to restore the factory default, release the
button before the sequence changes to Green/Yellow.
Alternating Green/Yellow While the Reset button is held in, the status light will begin
to blink in this sequence to indicate the factory default con
-
figuration was restored. Once the Host RJ-11 IP Gateway
indicates the configuration was restored, you can release the
reset button.
TABLE 3. Status - Error Conditions
LED Condition Description
Alternating Green/Red A serious system error occurred. See the system log for
more details.