- Airlink+ Network Router User Manual

Host RJ-11 IP Gateway User Guide, version 18
Hardware
• ETHERNET - Indicates the status of the Ethernet connection (RJ-45 port).
• PHONE - Indicates the status of the phone port (RJ-11).
Alternating Green/Yellow The current configuration is corrupt and the factory default
configuration is being used
Solid Red The Host RJ-11 IP Gateway has encountered a fatal error,
contact technical support for assistance.
TABLE 4. Ethernet
LED Condition Description
Solid Green The Ethernet link is available and idle.
Green/Yellow Blinking Network traffic is detected.
Off The Ethernet link is unavailable.
TABLE 5. Phone
LED Condition Description
Solid Green The port is open and idle.
Blinking Green The port is open, and data is being transmitted or received.
When data is being continuously transferred, this LED will
blink approximately 2 times per second.
Blinking Red Data errors will cause periodic red blinks. Persistent red
blinks may imply a configuration problem (incorrect baud
rate, parity settings, etc.)
Yellow Port is closed.
Solid Red Port hardware has failed.
Off Power is off.
TABLE 3. Status - Error Conditions