- Airlink+ Network Router User Manual

Host RJ-11 IP Gateway User Guide, version 30
Configuration Settings and Commands
FIGURE 13. Host RJ-11 IP Gateway: Security Settings
• System Password: The Host RJ-11 IP Gateway’s administrative functions can be protected by
a system password.
By default, no system password is configured. Once a password is set, your web browser will
prompt you for the system password whenever you try to access sensitive configuration pages.
The browser will ask for a username and password. The username is always “admin”. The pass
-
word will be what you configured.
• Network Isolation Configuration: By default, all network services are enabled. However, for
security, any or all listening services may be disabled. Unselect any services that you wish to
disable. These changes will not take effect until the next reboot.