- Airlink+ Network Router User Manual

Host RJ-11 IP Gateway User Guide, version 36
Configuration Settings and Commands
FIGURE 21. Host RJ-11 IP Gateway: Emailing Debug Information
The SMTP Server Information is the SMTP (mail host) you will be using to send the debug infor-
mation. You can usually find the SMTP settings in the email client you use. Not all email hosts will
allow relaying through their host.
Commands
The Host RJ-11 IP Gateway has some built in commands available.
Ping
You can use the Ping command to test a network connection.
FIGURE 22. Host RJ-11 IP Gateway: Ping
Enter the IP address to Ping or a Hostname and the Number of Pings then press the Ping button.
The command will display the results as follows:
Sending 10 PINGs to 209.75.217.6...
Response from 209.75.217.6: icmp_seq=0, time=10.0 ms
Response from 209.75.217.6: icmp_seq=1, time=10.0 ms
Response from 209.75.217.6: icmp_seq=2, time=10.0 ms
Response from 209.75.217.6: icmp_seq=3, time=10.0 ms
Response from 209.75.217.6: icmp_seq=4, time=10.0 ms
Response from 209.75.217.6: icmp_seq=5, time=10.0 ms