Network Hardware User Manual

Step 4 Secure the drive to the metal plate on the sides with the provided four
screws.
Step 3b SATA
Step 6 Re-attach the back panel to the device and secure it with the two screws
removed in step 1.
Step 7 Connect Office NAS to your router or your computer with the provided Ethernet
cable, and connect the supplied power adapter. Plug the power cord into a power
outlet.
(Note: connecting this device to your computer directly is not recommended since
many features will not be able to function.)
Continue on Back
Step 8 Turn it on by pressing the On switch in the back of the device. Verify the
Power and LAN LEDs are lit.
Step5 Re-attach the front panel to the device.
Congratulations! The hard drive installation is complete. For more informa-
tion about this product, please refer to the User's Manual in the provided
CD.