Network Router User Manual

WPA2(Mixed)

Select WPA pre-shared key for Encryption.

Enter the settings below:

• WPA Unicast Cipher Suite: Select WPA2(Mixed)

• Pre-Shared Key Format: Select Passphrase

• Pre-shared Key: Enter a key between 8 to 63 characters (alphanumeric, case sensitive).

This is the security key for your wireless network

Click OK to save the settings.

Note: It is suggested to write down the security settings (Encryption and Key) you

configured for the Router on a piece of paper and keep it for you to add more wireless

device to your network in the future.

Step 6 Click Apply to restart the router.

Step 7 Click OK, you will go back to the Status page with valid IP address assigned by you ISP

(or configured by yourself if you use Static IP) in WAN Status section.