Network Router User Manual

55
Parameter Description
Enable DMZ Check/uncheck to enable/disable DMZ.
Public IP You can select “Dynamic IP” or “Static IP” here. If you select “Dynamic
IP”, you have to select an Internet connection session from drop down
menu; if you select “Static IP”, please input the IP address that you want
to map to a specific private IP address.
Client PC IP address Please input the private IP address that the Internet IP address will be
mapped to.
Computer Name Pull down the menu and all the computers connected to the router will be
listed here. You can easily select the computer name without checking
the IP address of the computer. If you do not see any computer after you
click on the drop-down menu, select the option “Refresh” and you will be
given a list of computers that are connected to your network.
Add Click “Add” button to add the public IP address and associated private IP
address to the DMZ table.
Reset Click “Reset” to remove the value you inputted in Public IP address and
Client PC IP address field.
Current DMZ Table From the table, you can check each DMZ setting.
Delete If you want to delete a setting, check the ‘select’ box of the setting you
want to delete, then click ‘Delete’ button. (You can select more than one
setting).
Delete All If you want to delete all settings listed here, please click ‘Delete All’
button.