Network Router User Manual

Parameters Description

Enable MAC Filtering Check this box to enable the MAC filtering function. Please

select “Deny” or “Allow” to decide the behavior of MAC filtering

table. If you select Deny, all MAC addresses listed in filtering

table will be denied from connecting to the network; if you select

Allow, only MAC addresses listed in filtering table will be able to

connect to the network, and all other network devices are

rejected.

Client PC MAC Address

Input the MAC address of the devices you want to filter in format

‘xx:xx:xx:xx:xx:xx’.

Computer Name Pull down the menu and all the computers connected to the

router will be listed here. You can easily select the computer

name without checking the IP address of the computer. If you do

not see any computer after you click on the drop-down menu,

select the option “Refresh” and you will be given a list of

computers that are connected to your network

Comment

You can input any text here as the comment of this MAC

address, like ‘ROOM 2A Computer’.

Add Click “Add” button to add the MAC address and associated

comment to the MAC address filtering table.

Reset Remove all inputted values.

Current

MAC Filtering Table From the table, you can check each MAC Address filter setting.

Delete If you want to delete a specific MAC address entry, check the

‘select’ box of the MAC address you want to delete, then click

‘Delete’ button. (You can select more than one MAC addresses).

Delete All

If you want to delete all MAC addresses listed here, please click

‘Delete All’ button.

Reset

You can also click ‘Reset’ button to unselect all.

3.4.3 URL/Keyword Filtering

You can block access to certain websites or web contents from local PCs by entering a full URL address

or just keywords about the web contents. This filter can help parents to manage the Internet usage for

their children (i.e. Parental Control).