Network Router User Manual

70
3.6 Administration
The Administration page allows you to specify a time zone, to change the system password and
to specify a remote management port, to upgrade firmware, to save/reload configuration
settings, to enable system log, to view the statistics information, and to enable/disable UPnP for
the Router.
3.6.1 Time
Parameter Description
Current Time Display the router’s current time. You can manually configure it
or Click on Copy Time from PC.
Enable NTP Update Check to enable time auto-synchronization through Internet.
Time Zone You can select your local time zone here. The router will sync
time according to your time zone selection.
Time Server Address Input the IP address / host name of time server here
Daylight Savings If the country you live uses daylight saving, please check the
Enable box and choose the duration of daylight saving.
After you finish with all settings, please click “Apply” button.
If you want to reset all settings in this page, please click “Cancel” button.
After you clicked Apply, the following message will be displayed on your web browser: