Instruction Manual

CONNECTIONS
REMOTE CONTROL
SENSOR
Inserting batteries
Detach the battery cover on the rear of the remote control and insert
two R6 (size AA) batteries. -+ Q
When to replace the batteries
The maximum operational distance of the remote control should be
approximately 5 meters (16 feet). When this distance decreases,
replace the batteries with new ones.
NOTE
Do not mix different types of batteries, or old batteries with new
ones.
If you are not going to use the unit for a long period of time, remove
the batteries to prevent possible electrolyte leakage.
Hints for correct operation
The remote control may not operate correctly when:
the line of sight between the remote control and the unit’s remote
sensor is exposed to intense light, such as direct sunlight.
other remote controls are used nearby (television etc.).
^BsSi
I INF OUT
He
V.
...^
OTHER CONNECTIONS
CONNECTING OPTIONAL EQUIPMENT-* D
You can listen to and record sounds from optional equipment
connected to this unit.
Use a cable with an RCA phono plug (not supplied) to connect
analog equipment (turntables, LD players without digital output
connectors, VCRs, etc.) for audio playback.
Connections
Connect the red plug to the R jack, and the white plug to the L jack
of the VIDEO/AUX jacks.
When connecting a turntable
Use an Aiwa turntable equipped with an equalizer amplifier.
CONNECTING A SUPER WOOFER
Connecting a super woofer increases the realism of low-frequency
sounds.
Connect a super woofer with a built-in amplifier (Aiwa TS-W5 etc.)
to the SUPER WOOFER terminal. -» Q
Refer to the super woofer operating manual for details.
V.
______
y
16