Instruction Manual

CD PLAYING

PROGRAMMED PLAY

The CD player has a built-in memory function that ailows play of up

to 30 tracks over three discs in any order.

1 Press the PRGM button in stop mode.

The PRGM indicator flashes in the dispiay.

2 Press one of the DISC DIRECT PLAY buttons to

select a disc.

The selected disc is indicated in red in the dispiay.

Go to the next step when the tray stops rotating.

3 Press the numeric buttons and the -t-10 button to

program a track.

Example:

® To select the 16th track, press the -i-IO button and then

press the 6 button within 4 seconds.

then press the 0 button within 4 seconds.

DISPLAY

When each track seiected, the dispiay © is shown. In a few

seconds, the display changes to ®.

® Program number

(D Disc number

@ Seiected track number

The dispiay changes after a few seconds.

® Totai playing time of the selected tracks

@ Total number of selected tracks

4 Repeat steps 2 to 3 to program other tracks.

5 Press the button to start play.

To check the program

Each time the DOWN or ►► UP button is pressed before

piaying, a disc number, a track number, and a program number wili

be dispiayed.

To clear the program

Press the ■ CLEAR button before playing or press the ^ OPEN/

CLOSE button.

To add tracks to the program

Before piaying, carry out steps 2 and 3. The track wili be pro

grammed after the iast track.

To change the programmed tracks

Ciear the program and carry out all the steps again.

NOTE

> The DISC CHANGE button does not operate during programmed

play.

■ During programmed piay, the remaining time is not displayed

when the CD EDIT/REMAIN button is pressed.

■ Random piay cannot be combined with programmed play.