Operation Manual

Caution:

There is a danger of explosion if batteries are replaced incorrectly.

Replace batteries with the same type and same brand only.

When the unit is intended for being unused for a long period of the time. Slide the

FUNCTION switch to OFF position and remove all batteries from the main unit.

POWER CONNECTION

Connecting AC Power

Connect the small end of AC cord to the socket at the back of the main unit and insert the plug of AC cord

into standard AC wall outlet.

Battery Operation

Before installing batteries (not included), ensure that the unit is disconnected from the mains supply.

Remove the battery compartment cover on the bottom of the unit by lifting up the two lugs on the battery

cover. The battery cover can then be lifted up.

Install 8 pieces of 1.5V (UM2) batteries (not included) by following the polarity markings and then replace

the cover.

For battery operation, unplug the AC cord from the AC wall outlet first and then remove the AC cord from

the socket at the back of the main unit.

Caution:

The unit is designed to operate from mains supply of AC 230V~50Hz. If the plug of AC cord does

not fit properly, try to turn it over and try again. Do not force it. The unit is intended for being

unused for a long period of the time. Please slide the FUNCTION switch to OFF position to turn

off the unit and unplug the power cord from the AC wall outlet.

230V 50Hz

AC Outlet

BATTERY DOOR