User Guide

12
i
● Normally, if an MP3 disc is loaded, the unit will take longer time to read
the initial data.
● A DVD that does not match the region code cannot be read by this
appliance.
● If a disc contains mixed content (e.g. MP3 and video files), the appliance
will only recognise, list and play one content type.
● The screen saver becomes active if no disc has been loaded for
3 minutes, or if the appliance has been in STOP mode for 3 minutes.
Using the PROGRAM function
● Press the PROGRAM button (30) to enter the PROGRAM function.
● Press the digit buttons (21) to select a desired track, and use the arrow
button down (25) to highlight the next entry.
● To confirm the selection and start the program, move the highlight to
"START" and press the ENTER button (26).
● To stop the progam, press the PROGRAM button (30) and press the
ENTER button (26).
Using the AB function
The AB function can be used to repeat a specific section of a DVD.
● Press the AB button (29) to select the starting point (A).
● Press the AB button (29) again to select the ending point (B).
The appliance plays the section repeatedly.
● Press the AB button (29) again to cancel the function. The appliance will
resume the normal playback.
Using the MP3/MPEG4 playback function
● Insert an MP3/MPEG4 disc. A content menu will display on the TV screen.
● Press the up/down arrow buttons (25) to select a folder or a file.
● Press the ENTER button (26) to enter the selected folder or file.
● Press the PROGRAM button (30) to switch between folders and files.
Press the ENTER button (26) to confirm.
Using the JPEG playback function
● Insert a JPEG disc. A content menu will display on the TV screen.
● Press the up/down arrow buttons (25) to select a folder or a file.
Press the ENTER button (26) to start the slide show.