Operation Manual

15
AHC1400
● To stop playback temporarily, press the STOP button (34) once. Press the
button again to stop playback permanently, or press the PLAY/PAUSE
button (42) to resume playback.
● To repeat a chapter (DVD) or one or all tracks (CD):
- Press the REPEAT button (32) once to repeat the current chapter or
track.
- Press the button once again to repeat the current title.
- Press the button once again to repeat all chapters or tracks.
- Press the button once again to cancel the function.
● To play the DVD frame by frame, press the STEP button (30).
Press the PLAY/PAUSE button (42) to resume normal playback.
● To view a specic title of a DVD, press the TITLE button (28).
Use the arrow buttons to select the title.
● To select the audio language of a DVD, press the AUDIO button (29)
repeatedly until the desired language is set.
● To switch on the subtitles of a DVD, press the SUBTITLE button (37).
Press the button again to switch off the subtitles.
● To select extra information of a DVD or CD (remaining time/passed
playtime/track number/chapter number), press the OSD button (40).
● To select the camera angle, press the ANGLE button (41).
i
● Normally, if an MP3 disc is loaded, the unit will take longer time to read
the initial data.
● A DVD that does not match the region code cannot be read by this
appliance.
● If a disc contains mixed content (e.g. MP3 and video les), the appliance
will only recognise, list and play one content type.
● The screen saver becomes active if no disc has been loaded for
3 minutes, or if the appliance has been in STOP mode for 3 minutes.
Using the GO TO function
The GO TO function can be used to select a specic starting point on a DVD
or CD.
● Press the GO TO button (24).
● Press the arrow buttons (16) to select an entry.