Operation Manual

19
AHC1400
● Press the arrow buttons (up and down) to enter the submenu.
● Press the ENTER button (20) to select a setting, or the left arrow button to
cancel the selection.
● Press the ENTER button (20) to store the setting.
● Press the SETUP button (13) to exit.
General setup page
● In the TV DISPLAY section, press the arrow buttons (16) to select 4:3
PANSCAN or 4:3 LETTERBOX for a conventional TV set. Select 16:9
for a wide screen TV set.
● In the ANGLE MARK section, press the arrow buttons to switch this
function ON or OFF. When switched ON, the appliance shows the angle
mark when multi-camera angles are available.
● In the OSD LANG section, press the arrow buttons to choose the language.
● In the CLOSED CAPTIONS section, press the arrow buttons to switch this
function ON or OFF. When switched ON, the appliance shows hidden text
when it is available.
● In the SCREEN SAVER section, press the arrow buttons to switch the
screen ON or OFF.
● In the LAST MEMORY section press the arrow buttons to switch this
function ON or OFF. When switched ON, the appliance remembers the
disc's last playback time.
Audio setup page
Analog audio setup
DOWNMIX
● Select LT/RT to mix 5.1-channel audio into left channel and right channel.
● Select STEREO to mix 5.1 channel audio into signal stereo.
● Select 3D SURROUND to create a virtual surround effect from stereo or
multi-channel signal.
● Select 5.1CH to switch this function off.
i
This function is only available for Dolby AC-3 encoded 5.1-channel
discs.
FRONT, CENTER, REAR & SUBWOOFER
This function is used to adjust the audio output level of the speakers.
● FRONT: Set the output level to LARGE or SMALL.