Operation Manual

20
CENTER: Set the output level to LARGE, SMALL or OFF.
REAR: Set the output level to LARGE, SMALL or OFF.
SUBWOOFER: Set the output level to ON or OFF.
i
The centre and rear speakers can only be adjusted when 5.1CH is
set.
DIALOG
This option is only available when LT/RT or STEREO is set.
Adjust the volume level of the centre speaker in a 2.1-channel audio
downmix.
DYNAMIC RANGE CONTROL
Select the value (AUTO, ON or OFF).
Digital audio setup
DIGITAL OUTPUT
Select SPDIF OFF to switch off the digital audio signal output.
Select SPDIF RAW to set the digital audio signal output to its raw format
(DTS/Dolby Digital 5.1).
Select SPDIF PCM to set the digital audio signal output to PCM format.
LPCM OUTPUT
This option is only available when SPDIF PCM is set.
Select a sample rate for the digital audio output. There are two options,
48 kHz and 96 kHz.
i
Before switching this option off, check that the amplier connected
is compatible with 96 kHz digital signals.
Dolby digital audio setup
DUAL MONO
Stereo: both channels as is. STEREO is the default setting.
L-Mono: left channel only.
R-Mono: right channel only.
Mix-Mono: the average of both the left and right channel.
i
This function is only available for Dolby AC-3 encoded 2-channel
discs.