Operation Manual
24
Password setup page
● PASSWORD MODE: Switch the password function on or off. Enter the
correct password to switch the mode on or off.
● PASSWORD: Change the default password. Enter the current password
in the rst box. Enter the new password in the second box. Enter the new
password again in the third box to conrm.
Cleaning and maintenance6.
!
WARNING
Before performing any cleaning or maintenance, switch off and
unplug the appliance.
● Clean the outside of the appliance with a soft cloth. When the appliance is
very dirty, dampen the cloth slightly with water and a neutral solution.
Handle and care of a disc6.1
● Hold the disc with ngers. Hold the disc outer edge and/or the centre
spindle hole. Do not touch the disc surface.
● Do not bend or press the disc. Do not expose the disc to direct sunlight or
heating sources.
● Clean the disc surface with a soft, dry cleaning cloth. Wipe the disc
surface gently, radially, from centre towards the outer edge.
● Do not apply thinner, alcohol, chemical solvent, or sprays when cleaning.
Such cleaning uids will permanently damage the disc surface.