Operation Manual

26
Moisture may have condensed inside the appliance.
Remove the disc and leave the appliance powered
on for one or two hours.
No sound or incomplete audio Select another audio track.
During SCAN, SLOW MOTION or SINGLE STEP
the sound is muted.
No scan or skip possible Some discs are programmed to refuse user action at
certain sections. This is no malfunction. Single
chapter or track discs do not allow skip function.
Picture distorted or noisy Disc may be damaged or dirty, clean the disc or try
another disc.
Check TV system setting (PAL/NTSC).
A VCR is connected between the appliance and the
random equipment. Connect the appliance to a A/V
directly.
Clean the disc.
Picture not full screen Select the screen format from the appliances setup
menu.
Select screen format in disc start menu.
MP3 playback
Trouble Action
No sound or incomplete audio If MP3 data is mixed with other les on CD, the
appliance may play the non-MP3 les as noise or
without sound or it rejects the disc.
Check if the played le is in MP3 format or select
another le to play.
AUX
Trouble Action
No sound on the unit system. Input source is low. Increase the volume level on the
audio source device.
No picture Check if the TV is switched on and set to the correct
A/V input.
Check cables for connection problems.
Check cables for damage.