Technical data

13
AHC1400
Operation5.
All functions of the appliance are accessible using the remote control.
All instructions refer to operation with the remote control, unless indicated
otherwise.
Master power switch5.1
The appliance is equipped with a master power switch (10) located at the
back panel.
● Set the switch into the ON position prior to taking the appliance into
operation.
● Set the switch into the OFF position prior to disconnecting from the mains.
i
● The appliance is designed to be operated using the remote control.
For regular use you may nd it convenient to switch the appliance to
standby mode after use. However, if you wish to care for the environment
and not waste energy by leaving the appliance in standby mode, you can
also switch off at the master power switch.
● When the appliance is not in use for longer period, we recommend to
switch the appliance off at the master power switch.
Quick start5.2
General functions
● Check that the master power switch (10) is in the ON position.
● To switch on the appliance, press the STANDBY button (11). To switch off
the appliance, press the STANDBY button (11) again.
● To select the source mode (DVD/TUNER(AM/FM)/LINE IN), press the
SOURCE SELECT button (21).
● To adjust the volume, press the VOL + button or the VOL - button (15).
● To adjust the volume of each speaker separately, press the CH-LEVEL
button (19). Then press the VOL + button or the VOL - button (15).
● To select the tone (bass/treble), press the TONE button (18). To adjust the
tone, press the VOL + button or the VOL - button (15).