Installation Instructions

3
Important Safety Instructions
FOR THE INSTALLER
Read this guide before installation. The appliance must be installed by
a professional installer according to the instructions in this manual and
in accordance with all applicable regulations.
Electrical connections
• All wiring work must be done by a qualified electrician in accordance with
national wiring regulations.
• The mains voltage must be in the range of 90-110% of that stamped on the
rating plate. The switch or power plug must be kept clean.
• Before accessing the terminals, all the power circuits must be disconnected
from the power supply.
• All wires must be connected correctly, otherwise the unit will malfunction and
cause damage to the air conditioning system.
• The air conditioner must be grounded. Incomplete grounding may result
in electric shocks. Do not connect the earth wire to the gas pipeline, water
pipeline, lightning rod or telephone earth wire.
• An earth leakage breaker with a rated capacity of more than 1.5 times the
maximum current must be installed to avoid possible electric shocks.
• If the air conditioner is not fitted with a supply cord and a plug, an all-pole
switch must be installed in the fixed wiring and the distance between
contacts should be no less than 3mm.
• If the power supply cord is damaged, it must be replaced by the
manufacturer or its service agent or a similar qualified person in order to
avoid a hazard.
• For the method of connection of the appliance to the electrical supply and
interconnection of separate components, please see the electric connection
elements chart attached to the outdoor unit.
• Make sure that after installation the power plug can easily be reached.
• If the model has no plug a switch with a contact separation of at least 3mm
in all poles shall be added in the fixed wiring.
PROTECT YOUR WARRANTY
These installation instructions are for use by an appropriately
qualified installer. Do not try to install the air conditioner on your
own; doing so will expose you to danger and void the warranty.
Contact a licensed installer.
After Sales Support
1300 886 649 | [e-mail]