Installation Instructions

4
Installation
• The air conditioner’s outdoor unit must be installed on suitably strong
supports.
• During installation of the indoor and outdoor units, do not allow children
access to the working area.
• Make sure that the base of the outdoor unit is firmly fixed, otherwise it will
produce abnormal noise and vibration during use.
• Do NOT install the outdoor unit:
X In an area where the running noise could disturb neighbours
X In environments where the air could contain gas, oil or sulphur
X Near sources of heat
X At a distance of less than 1m from flammable substances (e.g. alcohol or
other flammable liquids or gases) and pressurised containers (e.g. spray
cans).
• If the appliance is used in areas without the possibility of ventilation,
precautions must be taken to prevent any leaks of refrigerant gas from
remaining in the environment and creating a fire danger.
• Check that air cannot enter the refrigerant system and check for refrigerant
leaks when moving the air conditioner.
• Carry out a test cycle after installing the air conditioner and record the
operating data. Make sure that air cannot enter the refrigerant system and
check for refrigerant leaks when moving the air conditioner.
Important Safety Instructions (Cont.)
After Sales Support
1300 886 649 | [e-mail]