Operation Manual

12
After Sales Support
1300 886 649 | [e-mail]
Instructions
Remote Control Operation of the Indoor Unit
• Point the remote controller at the unit and press the ON/OFF button.
• Press the MODE button, repeatedly, to select the desired mode from the
following options: Auto, Cool, Dry, Heat, Fan.
• Press the SET TEMPERATURE buttons to increase or decrease the
readings until the desired temperature is displayed. The available
temperature range is from 16°C-32°C.
NOTE: In Auto and Dry mode, the temperature is automatically set to 25°C
and cannot be adjusted.
• Press the FAN SPEED button, repeatedly, to select the desired fan speed
from the following options:
Low [ ], Medium [ ], High [ ] or Auto [ flashing].
NOTE: In Dry mode, the fan speed is automatically set to low speed and
cannot be adjusted.
• Press the SWING button, repeatedly, to select the desired up/down airflow
direction from the following options:
Natural flow [ ], Swing [ flashing ] or Fixed direction [ ].
NOTE: In Dry mode, the airflow is automatically set to fixed direction.
Special Features
Turbo Operation
• Press the TURBO button during Cool or Heat operation to set the airflow rate
to High for fast cooling or heating.
• Press the TURBO button again to cancel Turbo operation.
NOTE: During Turbo operation the airflow rate cannot be changed.
Adjusting the Left/Right Airflow Direction
Horizontal swing adjustment
To adjust the direction with the remote controller, press the AIRFLOW button
to set the air delivery to automatic left/right swing or fixed airflow direction.