User's Manual

After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | [e-mail]
24
Instructions (Cont.)
Rinse aid
Rinse aid is automatically released during the last rinse to prevent water from forming
droplets on your dishes, which can leave spots and streaks. It also improves drying by
allowing water to roll off the dishes. Your dishwasher is designed to use liquid rinse aid.
CAUTION!
Only use specific, branded rinse aid for your dishwasher. Never fill the rinse aid
dispenser with any other substances (e.g. dishwasher cleaning agent, liquid
detergent) as this could damage the appliance.
Filling the rinse aid dispenser
The rinse aid dispenser is located inside the door next to the detergent dispenser. It
holds about 110mL.
Fig. 17: Turn anticlockwise to open Fig. 18: Pour in rinse aid
Fig. 19: Turn clockwise to lock
• To open the dispenser, turn the cap in
anticlockwise direction (left) and lift it out
(Fig. 17).
• Carefully pour rinse aid into the dispenser
until the level indicator turns completely
black (Fig. 18). Take care not to overfill.
• Replace the cap in the opening and turn
it clockwise (right) to close the dispenser
(Fig. 19).
CAUTION!
Clean up any rinse aid spilled while filling with an absorbent cloth or paper towel to
avoid excessive foaming during the next wash.
Do not forget to replace the cap before you close the dishwasher door.