User's Manual

After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | [e-mail]
31
Code Meaning Possible Cause
The “Rapid” indicator
flashes frequently.
Longer inlet
time
Faucet is not opened, or water intake is
restricted, or water pressure is too low —
check and ensure the faucet is open and
your water pressure is normal.
The “90 mins”and
“Rapid” indicators
flash frequently.
Not reaching
required
temperature
Malfunction of heating element — call for
service.
The “ECO” indicator
flashes frequently.
Overflow
Some element of the dishwasher leaks —
call for service.
Error codes
When there is a malfunction, some of the indicator lights on the control panel will start
flickering in order to warn you that something is wrong.
FAQs and Troubleshooting Guide (Cont.)
WARNING!
• If the code indicates a malfunction, overflow or leakage, shut down the
dishwasher, turn off the power and close the water supply. Then call our after
sales support center for advice, or contact a suitably qualified service technician
• If there is water in the base of the tub because of an overfill or small leak, make
sure to remove the water before restarting the dishwasher.