User Manual

After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | info@tempo.org
32
Other Useful Information (Cont.)
Cleaning the door seal and glass (after each wash)
After each wash:
Wipe the glass and seal to remove lint and stains. A build-up of lint can cause leaks.
Check for coins, buttons and other small objects in the seal creases (Fig. 17) and
remove them.
Leave the door slightly ajar so the inside can dry properly. This will also help prevent
the development of mould or odours.
Cleaning the detergent drawer (when required)
Remove detergent residues regularly. The detergent dispenser may be removed for
cleaning.
Pull open the dispenser drawer until you feel a resistance. Press down the release
catch and at the same time pull the drawer right out of the machine (Fig. 14).
Remove the siphon from the compartment and clean it.
Clean the drawer using a brush and warm water (Fig. 15).
Use a bottle brush to remove detergent residues from inside the housing (Fig. 16).
Wipe all parts dry with a clean cloth, then reinstall the drawer back into its space.
NOTE: Do not use any solvents, alcohol, harsh chemicals, alkaline or abrasive
cleaning agents, or sharp objects, to avoid damaging the surface.
Fig. 14 Fig. 15 Fig. 16
Fig. 17